25
Set t
he Coax
Freq
uencie
s
Set the Frequency/Frequencies to send out
This unit can output up to 4 adjacent frequencies ( RF1 RF2 RF3 RF4 )
Each frequency can be turned on if something is sent to it from the encoders, usb, or asi, otherwise turned off.
Copy the values and selections as on the picture for a perfect operation
In this Example, the unit is used for the US American Cable Operation
STANDARD
= For US United States Cable Operation, select J83B
CONSTELLATION
= For US United States Cable Operation, select 256 QAM
SYMBOL RATE
= Automatic when used in J83B mode, related to the selected modulation
RF1
= Frequency used on the coax to distribute the first channel
In this example 195 MHZ (equals to channel 10 over coax )
NOTE: The used frequency to distribute the signal is not the destination memory on the TVs.
The destination memory on the TVs is set via the MAJOR / MINOR channel number in the encoder sections.
Summary of Contents for VeCOAX MicroMod-2
