PVI VeCOAX MicroMod-2, Reference Manual

Page: 24 / 40

24
Configur
e Chan
ne
l 2
Status Box ( top right )
= Shows the current format for the incoming video and the current encoding bitrate
NORM = UNKNOWN > the video is not connected / the video format is invalid / the video is connected to a wrong
port respect the one selected.
( 50 OR 59.94 FRAMES PER SECOND )
Check the INTERFACE selector is set to the proper input.
Test with a DVD Player or a Bluray disk player FIRST.
DO NOT USE A COMPUTER AS VIDEO SOURCE AT FIRST as it might require settings to
output the same video format as the DVD or Bluray Disk devices, and might make confusion.
The TV OVER COAX MPEG Standard is only : 480i – 576I – 720P – 1080i – 1080p 50 / 59.94 FPS
If the Video Dot switches between Green/Red Continuously, your video source is feeding
a wrong video format, Not Suitable for the Video Over Coax distribution.
The limit is the TV TUNER MPEG DECODER over coax which cannot decode non tv standards.
In case your source does not support any of the TV Video format standard, you could use an external
scaler to convert any unknown non-tv formats to a valid tv format
NOTE : IF the video source works when connected directly (hdmi or video) to the tv, this is because
the tv is a slave monitor device when connected via video cable, different from when the tv
works receiving from the coax using its built-in coax MPEG Video receiver decoder
BITRATE = 0.0 > the encoder is not running, so the channel will not be found from TV scans