background image

 

Operating Instructions:   

       Transmit no more than the rated duty factor of 50% of the time.    To transmit (talk), push the   

Push-To-Talk (PTT) button.    To receive calls, release the PTT button.    Transmitting 50% of   

the time, orless, is important because this radio generates measurable RF energy exposure only   

when transmitting (in terms of measuring for standards compliance).       

Hold the radio in a vertical position in front of face with the microphone (and the other parts of   

the radio, including the antenna) at least one inch (2.5 cm) away from the nose.    Keeping the   

radio at the proper distance is important because RF exposures decrease with distance from the   

antenna.    Antenna should be kept away from eyes.   

       When worn on the body, always place the radio in a Xiamen Puxing Electronics Science& 

Technology Co., Ltd approved clip, holder, holster, case, or body harness for this product.     

Using approved body-worn accessories is important because the use of Xiamen Puxing Electronics 

Science&Technology Co., Ltd or other manufacturer’s non-approved accessories may result in   

exposure levels, which exceed the FCC’s occupational/controlled environment RF exposure limits.   

              If you are not using a body-worn accessory and are not using the radio in the intended use position 

  in front of the face, then ensure the antenna and the radio are kept at least 2.5 cm (one inch) from   

the body when transmitting. Keeping the radio at the proper distance is important because RF   

exposures decrease with increasing distance from the antenna.   

Use only Xiamen Puxing Electronics Science&Technology Co., Ltd approved supplied or replacement   

antennas, batteries, and accessories.    Use of non-manufacturer-nameapproved antennas, batteries, and   

accessories may exceed the FCC RF exposure guidelines.   

 

Summary of Contents for PX-558














Reviews: