
06.START
Don't disassemble the case of the battery.
START
07
mic
PX-55
8
MIC
Don't short circuit the battery charger contacts or threw the battery into fire.
Match the top of the battery pack with the corresponding grooves
on the radio.
Push the battery onto the bottom of the radio, buckle the safety lock.
07. START
To remove the battery pack, lift the safety lock and pull the
battery pack away from the radio.
INSTALL ANTENNA
INSTALL BELT CLIP
When necessary, you can install the belt clip to the back of the radio.
Note:
Without installing the belt clip, the installing area will become hot due
to continuous communication or put in hot environment. You should
remove the belt clip first before disassemble the battery pack.
Hold the radio, screw the antenna into the connector on the top of the radio.
Hold the antenna and turn it clockwise until being tight.
Note:
Don't use the antenna as handle, keychain or speaker/microphone hook, it will damage
the antenna and affect the function of the radio.
INSTALL/REMOVE BATTERY
The average use time of the battery pack is 10 hours.
It calculated as 5% TX time, 5% RX time and 90% standby time.