PURSUIT 2670 CUDDY CONSOLE, Owner'S Manual

Page: 61 / 137

2670 CUDDY CONSOLE
9-3
Boarding Ladder
The boarding ladder is mounted to the rear of the stern bait and tackle rigging station when it is
in the stored position. To use the ladder, remove it from the storage clips and slide the studs into
the special bracket on the port side of the transom. The ladder floats and must be secured in the
boarding position by turning the cam lock on the ladder so it catches the bottom of the transom
ladder bracket. The ladder must be removed from the transom bracket and properly secured to
the storage clips before starting the engines.
MOVING PROPELLERS ARE DANGEROUS. THEY CAN CAUSE DEATH, LOSS OF
LIMBS, OR OTHER SEVERE INJURY. DO NOT USE THE SWIM PLATFORM OR
SWIM LADDER WHILE THE ENGINE(S) ARE RUNNING. STOP THE ENGINE(S) IF
DIVERS OR SWIMMERS ARE ATTEMPTING TO BOARD. ALWAYS REMOVE AND
PROPERLY STORE THE LADDER BEFORE STARTING THE ENGINE(S).
Trim Tabs
The trim tabs are recessed into the hull below the swim platform. The trim tabs are an important
part of the control systems. Please refer to the Helm Control Systems chapter for detailed
information on the trim tabs.
9.3 Cockpit
IN CERTAIN CONDITIONS, OPEN EXTERIOR DOORS AND HATCHES THAT ARE
NOT SECURED PROPERLY CAN SLAM CLOSED UNEXPECTEDLY AND CAUSE IN-
JURY TO PASSENGERS OR DAMAGE TO THE BOAT. MOST DOORS AND
HATCHES ARE EQUIPPED WITH SPECIAL FASTENERS, HATCH LIFTERS, OR
SNAPS AND/OR STRAPS, TO SECURE THEM IN THE OPEN POSITION. ALWAYS
MAKE SURE THAT THESE HATCHES AND DOORS ARE PROPERLY SECURED
WHENEVER THEY ARE IN THE OPEN POSITION.
Leaning Post/Tackle Storage
The leaning post/baitwell is equipped with rod
holders, a leaning post cushion and tackle storage.
The tackle drawers are removable and the door
can be locked to secure the tackle when the boat is
unattended.
Leaning Post Tackle Storage