Purmo TempCo Central, User Manual

Page: 33 / 266

33
Automatic change (contact)
The working mode heating or cooling will be done by the
connecting box “
H&C module
”.
Generally use when reversible heat pump are installed.
4.4 Display
On this submenu you can adjust the contrast and the luminous
intensity of the backlight.
Choose the value which must be adjusted with the underlined
cursor, press
(Ok) when the value start blinking, adjust it with (
◄-)
or
(►+)
. Press (Ok) to valid your adjustments.
Dimming function on backlight.
The backlight is always light up (at 100%) during 1 minute if a key
is pressed.
But you can also active the backlight all the time with dimmed
function. After 1 minute the backlight will go to this setting level.
(By default the value is adjusted at 0%
“Off”).
During the adjustment the backlight follow the setting to show the
intensity.
4.5 Factory settings
This menu will be used to reload the product with manufactured
configuration.
Display
0%
50%
Factory settings
No Yes