Purmo TempCo Central, User Manual

Page: 32 / 266

32
The active units are in negative, move the underlined cursor with
(
◄-)
or
(►+)
and press (Ok) to valid your choice.
4.3.6 Installation type
In this submenu you must choose the type of the installation,
To enter in the installation menu move the navigation cursor on the
“
Installation type
” line and press
(OK) .
To change the installation, move the navigation cursor in front of
the desired line and Press
(Ok)
to valid “

”.
Heating:
- To be use when your house is only equipped with heating system
only.
Cooling:
- To be use when your house is only equipped with cooling system
only.
Reversible => Heating & Cooling:
- To be use when your house is only equipped with heating and
cooling systems.
- Two possibilities must be appears:
Manual change
The working mode heating or cooling will be done by the end user
on the special menu on the programmer, in the main menu. See
the next part “
Heat & Cool Mode
” for more information.
Installation
Calibration sensor
Pump exercise

Units AM/PM...

Installation type
Installation type
Heating
Cooling

Reversible

Manual

Automatic (contact)