Puricom GuTZZI FT, Data Sheet Service Book

Page: 6 / 14

16
English
2. TECHNICAL CHARACTERISTICS
Application
Water treatment
• Reverse osmosis
Use
• Improves the drinking water’s characteristics (meeting all European Directive on
Water for Human Consumption 98/83 requirements and its national transpositions
in the various EU member states).
Modifications due to reduction or contribution
• Water treatment via reverse osmosis is able to greatly reduce salt and other
concentrations.
• Minimum reduction* of specific compounds and parameters:
Sodium – 90 %
Calcium – 90%
Sulphates – 90%
Chloride – 90%
Total Hardness – 90%
Conductivity – 90%
(*) Depending on the characteristics of the water to be treated (in the membrane outlet).
These values may vary in function of the type of post-filter used by the equipment and/or setting
of the mixing valve (where applicable).
Technical Information
PUMP
Control type High pressure switch .
Inlet solenoid valve
Safety lock Low pressure switch .
Electronic leaking sensor.
Maintenance notice.
Water quality control.
Dimensions (mm) 410 x 415 x215
Weight (kg) 10 Kg
Tank (dimensions) Built-in
Total tank volume 5,5 l
Entry connection 1/4”
Drain connection 1/4”
Tap connection 3/8”
Wall adapter 3/8” M-F *****
Drain collar 40mm drain tube
clamp
Pre-filters 1 x CS Sediments
1 x CS GAC
Working limits
PUMP
Pressure (max. / min.) 2.5 bar (250 kPa)
1 bar (100 kPa)
TDS (max.) 2000 ppm
Temperature (max. / min.) 40ºC – 2ºC
Hardness (max.) 15ºHF**
IN/INLET
OUT/OUTLET