ZIP /
User manual
/
10. Filter change and maintenance record
/
27
Register Your Zip at www.zipwater.co.uk
26 /
9.Troubleshooting
/
User manual
/
ZIP
Register Your Zip at www.zipwater.co.uk
8. Replace the elbow connectors to their corresponding spikes on
the RO cartridge.
9. Replace the membrane cartridge back into the retaining clips.
10. Connect the postfilter retaining clips back onto the RO cartridge,
and place postfilter into retaining clips.
11. Assembly back cover.
9. TROUBLESHOOTING
After any maintenance, please ensure absence of leaks in the sys-
tem by means of a visual inspection while the system makes two
complete cycles.
SYMPTOM
CAUSE
SOLUTION
1. The faucet is dripping
Dispenser defective.
Call for service.
2. Leakage outside the
system
Several possible causes. Call for service.
3. Zero production
No water in the lower
reservoir.
Fill tank
No power.
Check power supply.
If problem not solved, call for
service.
Lower reservoir
misplaced.
Ensure that the lower reservoir
is positioned properly.
If problem not solved, call for
service.
4. Production reduced
Inner tube pinched.
Check and repair.
Feed water outside the
operating range.
Check feed water quality or call
Technical Services.
Filter elements have
exceeded their useful life
Replace filters or call technical
Service
Several possible causes
Call for technical service.
6. System does not work
No water in the lower
reservoir.
Fill reservoir
No power.
Check power supply
Lower reservoir
misplaced.
Ensure that the lower reservoir
is positioned properly.
If problem not solved, call for
service.
7. LED off
The transformer is
disconnected or defective.
Make sure that the transformer
is properly attached.
5. Taste and odour
6. System does not work
7. LED off
