6
PureWay
ECO II Assembly Instructions
STEP
1
• 2 x black foundation brackets
• 1 ECO II Canister filtration system (blue top, clear cylinder)
• 6 Screws & nuts
• 2 x right angle 3/4” fittings
• 2 x 3/4” straight fittings
• 2 x 1” straight fittings
• 2 x 1.5” straight fittings
• 2 x adaptors
• 8 x black 0-rings
• 2 x grey U-clips to secure fittings onto the ECO II
• Two stainless steel cylinders
Remove all contents from the ECO II. Each system comes with the following components
Secure the black foundation brackets by placing bracket 1 on top of bracket two as shown
below ensuring the brackets fit securely into the alignment grooves.
Bracket # 1
Bracket # 2
Bracket #1 placed on top
of bracket #2
The ECO II Amalgam Separator requires minor assembly before ready to install to a dental vacuum
system. Follow the instructions below to assemble your ECO II and then proceed to install instructions.
STEP
2
