User Manual
7
4.
Button Control
Front panel buttons can be used for video switching, volume adjusting and output resolution
selection.
4.1
Signal Switching
①
Manual Switching
Press the
SORCE/AUTO-3s
button to select the HDMI, DP or VGA source, the corresponding
green activity LED will be lighted up.
②
Auto Switching
Long-press the
SORCE/AUTO-3s
button at least 3 seconds to enable auto switching mode,
the green activity LED (AUTO) will be lighted up. Press this button again to select next source
and exit auto mode.
The auto switching mode abides by the following principles:
New Input
Once new source is connected, the new source will be automatically switched to input signal.
Rebooting Device
The PT-PSW-41H has the ability to save the latest configuration before losing power. The
switcher automatically enters the mode as latest mode used; moreover, it detects all the
inputs and memorizes the connection status for future rebooting use. If the latest displayed
signal is still available, the unit will output the signal. Otherwise, the unit will detect all the
input signals wit priority from HDMI to VGA. When the first signal was detected, it will transfer
to output.
Signal Removing
Once removing the current display signal, PT-PSW-41H will detect all input signals with
priority from HDMI to VGA. It will transfer the signal firstly detected to be available to the
output device.
Summary of Contents for PT-PSW-41H
Page 26: ...User Manual ...
Page 27: ...User Manual ...
