User Manual
PT-PSW-21KVM
23
6.2
RS232 Command
Communication protocol: RS232 Communication Protocol
Baud rate: 9600
Data bit: 8
Stop bit: 1 Parity bit: none
The switcher can be controlled by sending the following RS232 commands:
Note:
⚫
Please remember to end the commands with the ending symbols “.” or “;”.
⚫
Type the command carefully, it is case-sensitive.
⚫
All commands ended with
“<CR><LF>”.
6.2.1 System control
Command
Description
Command & Feedback
Example
PHDBTON.
HDBaseT OUT POC
power on
HDBT 01 Power ON!
PHDBTOFF.
HDBaseT OUT POC
power off
HDBT 01 Power OFF!
HDMIA.
Auto-switch mode on
HDMI Out Switch Auto Mode!
HDMIM.
Manual-switch mode
on
HDMI Out Switch Manual
Mode!
HDMI[x].
HDMI input source
selection.
x = 1 & 2
1
–
Type-C
2
–
HDMI
HDMI Out Switch To 01!
HDMI Out Switch To 01!
POWON.
Turn off standby mode
Power ON!
Summary of Contents for PT-PSW-21KVM
Page 37: ...User Manual PT PSW 21KVM 33 ...
Page 39: ...User Manual PT PSW 21KVM 35 ...
