3
Quick Twist Undersink Water Filter System with LED Faucet
Operation
The Puretec Z12 & Z18 systems are designed to run economically for many years dependent
on the initial installation and periodical maintenance.
Flush systems for 10 minutes after any period of non-use more than 2 days. For a period of
non-use of 2 weeks or more, it may be necessary to replace cartridge.
Cartridge Replacement
To maintain the high quality of the purified water cartridges need changing every 6-12
months (dependent on water quality and usage).
When replacing the cartridge, ensure you reset the LED reminder light by removing/replacing
the battery from the rubber seat. Please refer to page 6 for a detailed diagram.
Order
Z1-R
for a replacement cartridge to suit your Z12 or Z18 system.
Installation
This system comes complete with an installation kit enabling it to be connected to 15
mm (½”) male thread. This product must be installed in accordance with local plumbing
regulations by a licensed plumber.
Installation requirements
1 15 mm (½”) Cold water line - mains only.
2 Supply pressure: 200 - 875 kPa.
3 Supply temperature 0° - 38 °C (protect from freezing).
4 Suitable location for faucet.
Alternative fittings may be required if being connected to anything other than 15 mm
(½”) copper pipe. No electrical or drainage requirements needed.
Summary of Contents for Z12
Page 12: ......
