4
Installation & Operation Manual
Copyright © Puretec Pty Ltd 2018
Installation Guide
7. Connect original braided hose attached to tap onto the head assembly outlet. Make
sure all fittings are tight and braided hose is kink free.
8. Restore the water supply and check for leaks. If they leak then undo cartridge and
check the cartridge is seated properly.
9. Run the system for at least 10 minutes (turn on mixer tap to run cold water) to remove
carbon fines. Water may appear milky, but this is normal and is only tiny air bubbles
that will clear after a short period.
Figure 1
Head
Assembly
Also includes
Extending Kit
Existing Mixer Tap
X7-R Cartridge
HOT COLD
Braided Hose
Non-Return Valve
Summary of Contents for PureMix X7
Page 8: ......