PureLink
VIP-200 II Quick Start Guide V1.0
7
Remote Control (optional)
Initial setup of remote control
NOTE:
In point-to-many configurations, many of the remote functions are not valuable or
applicable, as they are meant for managing multiple transmitters or receivers.
A remote being used for the first time, or after battery replacement, needs to be assigned an ID
The universal ID that will control all receivers is 8. Press the ‘Power’ and ‘8’ button at the same
time.
Typical remote-control operation for Point to Point Operation
OSD will clear ten seconds from displaying any menu
.
•
Display receiver MAC address
o
“Menu”, “0”, “Enter”
•
Display Local (Receiver) address
o
“Menu”, “1”, “Enter”
•
Display Host (Transmitter) address
o
“Menu”, “2”, “Enter”
