SMC4-4-16A16B.
Four-axis motion controller
Edition of 03.08.2016
7
www.purelogic.ru
8 (800) 555 63 74
At this time you can open the file, or return the file selection (re-select), or exit to the main screen.
Click «Open file» access to the contents of the file are shown below.
You can now browse the contents of a file, click the Advanced Function button the middle button, Or OK button brings up a menu interface.
You can select whether to start from the first row, or starting from the N line, or point to the N-line display, you can also choose to re-select the file
directly back to the file.
After selecting input baskets,You can enter the number of lines needed, Enter then select «pointing to select the line» you can jump directly to a
specific number of rows, As for the Extra large, super multi-line, time-consuming will be longer!
If input rows is greater than file rows itself,At this time point to most caudal of the file.
Click on «from the first line to start» and «from the selected line to start»,both will jump to the main interface, Open this file is completed, And hand
the primary key feature to the main precinct.
Starts running
You can start to run directly up! If there is a breakpoint before this, and did not change the file, then a window will pop up as follows:
The first is a safe altitude, the role of safe altitude: In the current head position will be filed with the tool when you want to move to the machining
position, this height is safe altitude, where it can be seen as the height of the Z-axis.
After deduction election baskets selected can change this value, You can also change the default safe altitude of the advanced features.
«Continued Point Run»: When a breakpoint in the point-to-point between N and N +1, Continued Point will start from N points, Which will be repeated
between N to N +1 points have been processed over the tracks, and access to the unfinished track.
