Edition from 05.06.2015
13
PLCM-E1b.
CNC Ethernet controller
www.purelogic.ru
8 (800) 555 63 74
05. Software installation
Restore IP button allows to reset IP-address of controller to those
installed by default.
If the controller is not found by the plug-in, follow the instructions in
item 6, if it is ok, skip item 6.
There is a complete solution for quick and easy configuration network
setting
In (C:\Mach3\Purelogic), supplied with the devise you will find set_
ip.exe file.
After starting, this application will set up of your PC network
connections.
In case when there are several network cards are installed (several
network connections) the program will offer to specify for what
connection to change the settings.
FOR CORRECT WORK WITH PLCM CONTROLLER IT IS NOT
RECOMMENDED TO PUT THE SWITCH IN AUTOMATIC POSITION.
You can assign your PC any address (e.g. 192.168.10.XX,
192.168.10.1.) The last value can be different different from 10, 11
and 12 (192.168.10.10 and 192.168.10.12 addresses for PLCM devices
established by the manufacturer.
Automatic address assignment installation will work with the controller
only when there is local DHCP server in the net. In all other cases the
controller will not contact the plug-in.
After necessary connection option and pressing the button install the
application apply required connection parameters.
After the installation the application will come with a message:
Fig. 10.
Restore IP – reset IP to pre-defined
Fig. 11.
Application window view Set_IP
Fig. 12.
Message about successful application of settings
