User Manual
IPAV Pro Series
53
5.10.1.3.
Display EDID
Use this tab to access and store the EDID coming from the display, connected to the
RX unit. Use the "Save" button to save the EDID to a file. It is also possible to select
and copy the EDID Hex values directly and paste them into an editor such as Notepad.
When no display is connected, the EDID view is blank.
5.10.1.4.
Network Setting
Use this tab to modify the device's host name and configure the IP address.
By default, the device's host name equals the device's MAC address.
The device's MAC address is also used as device host name by the IPAV Pro Control
Center software. To rename a device, enter a name (e. g. “RX1”) into the "Hostname"
edit box. Press the "Save" button to save the new host name. The host name is
persistent and kept until the device is forced back to factory defaults.
The IP address can be set to be either "DHCP" or "Manual".
Select "DHCP"
to receive the IP address from a DHCP server or to be auto-assigned
with an IP from the 169.254.X.X range, in case there is no DHCP server on the
network.
Select "Manual" to set a static IP address (IPV4 address, subnet mask and gateway
address).
Press "Save" to save the new IP address. The new IP mode settings are stored in non-
volatile memory and kept, until the device is forced back to factory defaults.
