14
8. Pressing the
“1”
button will continue to cycle through these parameters, but the changes are immediately saved
as they are adjusted.
9. Press the
“2”
button. The LED above SPEED 2 will begin to flash and the corresponding parameter LED will flash
while editing.
10. Use the
“+”
and
“-”
arrows to adjust the speed in RPM for SPEED 2.
11. Press the
“2"
button again and the display will change to SPEED 2 duration.
NOTICE:
SPEEDs 2 and 3 do not have a start time, as they begin their duration immediately after the previous
SPEED finishes.
12. Use the
“+”
and
“-”
arrows to adjust the duration for SPEED 2 in hours and minutes.
13. Repeat steps 9-12 to program SPEED 3-4 and QUICK CLEAN.
NOTICE:
Remember that the duration allowed for SPEED 3 will be limited to the remaining time in a 24 hour day.
Any time in the 24 hour day not programmed into SPEEDs 1-4, the pump will remain in a stationary state.
[SPEED 1 + SPEED 2 + SPEED 3 +SPEED 4 <24 Hours ]
14. Press the
Start/Stop
button and ensure the LED is lit. The pump is now on and will run the custom
user-programmed schedule.
NOTICE:
If the pump has been stopped via the
Start/ Stop
button, the pump will not run until the pump is turned
back on by the
Start/Stop
button. If the
Start/Stop
LED is illuminated then the pump is on and will run the
programmed schedule.
Speed Priorities
For schedule duration settings, SPEEDS are prioritized as follows: SPEED 1 -> SPEED 2 -> SPEED 3 -> SPEED 4.
SPEED 1 is the highest priority, while SPEED 4 is the lowest.
The drive will not allow a user to program a schedule of more than 24 hours. When the 24th hour of duration is
programmed it will take time from the lower priority speeds in order to add them to the SPEED currently being adjusted.
Example:
Starting Schedule (Before Adjustment)
SPEED 1 duration = 18 hours
SPEED 2 duration = 2 hours
SPEED 3 duration = 2 hours
If the user reprograms SPEED 1 to run for
22 hours, SPEED 2 (lower priority speed) will
automatically adjust to a 1 hour duration and
SPEED 4 (lowest priority speed) will adjust to a
0 hour duration.
End Schedule (After Adjustment)
SPEED 1 duration = 22 hours
SPEED 2 duration = 1 hour
SPEED 3 duration = 1 hours
SPEED 4 duration = 2 hours
SPEED 4 duration = 0 hours
