DEHUMIDIFIER STORAGE
If the unit will be stored for an extended period of time, complete the
following steps:
1. Turn off the unit and allow to dry
2. Wrap and secure the power cord,
3. Cover the filter mesh.
4. Store in a clean, dry space.
DUCTED APPLICATIONS
Ducting the dehumidifier allows the unit to be in one room while conditioning an adjacent
room.The supply grille is designed for 6”flex ducting. Be sure to secure the ducting with tie
wrap. Also,keep in mind that the supply ducting can be screwed into an adapter if necessary.
DUCTING INSATALLATION
Maximum length for ducting= 6'
Note: The supply duct adapter is standard on all units.
REMOVING SUPPLY DUCT ADAPTER
If it is necessary to remove the adapter,
place hand at bottom of adapter and use
your fingers to pull out and down on base
of adapter. This will lift hooks out of cover
holes.
INSTALLING SUPPLY DUCT ADAPTER
To install adapter, line up with holes
on the side of unit and push up from
base of adapter.
Maintenance
Always unplug the unit before doing any maintenance.
WARNING
CLEANING THE MACHINE BODY
CLEANING THE FILTER
Use a soft damp cloth to clean exterior of unit. Do not use any soap or solvents.
Unplug the unit.
Slide out the filter.
Clean the filter mesh by vacuuming
or washing with warm water (no soap
or solvents).
Be sure filter is completely dry before restarting
unit.
COIL MAINTENANCE
Once per year, clean the coils with an approved coil cleaner
Coil cleaner should be a self rinsing, foaming cleaner such as WEBR Coil Cleaner.
R
PureAiro
DSC 55S
1.
2.
3.
4.
1.
1.
2.
08
09
FLEX DUCT INSTALLATION
Rotate the flex duct counter-
clockwise
FLEX DUCT REMOVAL
Rotate flex duct clockwise.
Back View
HANDLE
MERV 8 FITER
HUMIDITY SENSOR
UNIT COVER
OUTLET END CAP
POWER CORD
