PureAire 99040 Instruction Manual Download Page 2

Page: 2 / 51

Welcome to PureAire Monitoring Systems

I’d like to thank you for investing in our continuous life safety and process control toxic gas

monitoring systems.

PureAire offers an unbeatable combination of experience and innovation in solving the

safety and environmental needs of our customers. We’re capable of providing small

systems of a few points to a total multi-point turnkey computerized package.

PureAire’s proprietary sensor cell technology and state-of-the-art electronics are designed

to interface with the latest distributive or PLC based control systems. We believe that our

experience, innovative products and commitment to service will satisfy your specific

monitoring needs now and in the future.

Our growth is a result of our total commitment to supporting our customers. We’re

available 24 hours a day, 7 days a week to help you when you need us. Our 24 hour

Emergency phone number is 1-847-420-3814. We can provide field service, preventative

maintenance programs and training to your technicians in the operation of our equipment.

Our goal is to provide the best after sale service and support in the industry. That’s just

one way PureAire takes that extra step to ensure your complete satisfaction.

Thank you again for investing in PureAire Monitoring Systems for your monitoring needs

and I’m proud to welcome you to our family of valued and satisfied customers.

Sincerely,

Albert A. Carrino
President

Summary of Contents for 99040




















































Search results

Summary of Contents for 99040

Reviews:

Related manuals for 99040

Brands by name

Popular brands

PureAire 99040, Instruction Manual

Search results

Summary of Contents for 99040

Reviews:

Related manuals for 99040

Brands by name

Popular brands