PureAire Monitoring Systems, Inc.
30
This menu will permit the setting of the two alarm relays and the fault relay settings
from a latching to a non latching state when they are activated.
From this main menu, pushing the joystick to the right will select the sub menu and the
digital display will scroll the following:
This is the menu at which to adjust the first level alarm relay state on the Air Check
O
2
Monitor.
To change this value, push the joystick right to display the relay state. The display will
Indicate
LATCH.
Pushing the joystick down will change the relay state from
LATCHING to NON-LATCHING. Press
ENTER
to accept the value.
After entering the relay state the display will default back to the
Set Latching
menu.
The display will scroll the following:
From this main menu, pushing the joystick to the right will select the sub menu and the
digital display will scroll the following:
Push the joystick down to select the next relay to be adjusted. The display will scroll
the following,
Set Latching Relay 2.
This is the menu at which to adjust the second level alarm relay state on the Air Check
O
2
Monitor.
..Set Latching Relay 1…
20.9%
LATCHING
20.9%
NONLATCH
20.9%
..Set Latching.…
20.9%
..Set Latching Relay 2…
20.9%
..Set Latching Relay 1…
20.9%
