Whisper 30 integral Modular Handbook
2.4 Quality Monitor (COMPACT Versions only)
The Quality Monitor shows the quality of the product water in PPM TDS (Part per Million Total dissolved
Solids)
When starting the system the quality is always for a short period ( 30-45sec) high salinity. Shortly the
monitor starts to count down. As soon as the quality reaches the pre-set value(factory set point is
500PPM) the water is produced into the tank.
The controller is activating a diversion valve to control the destination of the product water.
The diversion Valve is located at the right side of the Main control panel. There is an emergency gray
button, to override the valve. Only to be used, when the controller is not working. Push and turn to the
right to lock.
5
Digital Display ppm
Switch OFF- AUTO- ON
Normal position is AUTO.
OFF= Controller is OFF
AUTO= Controller is in the AUTO
position. Automatic product water
transfer to tank.
ON= Product water is always
produced into tank.
LED display: RED Controller is OFF
Amber= Water is produced into tank.
Green= Water is going over board
Calibrating screw
Set Point for adjusting product water
set value. To readjust, push the
yellow set button and turn with a tiny
screwdriver the desired set point.
Return- push MEAS
Summary of Contents for Whisper 30
