background image

2

Model #: PT500

IMPORTANT SAFETY INSTRUCTIONS 

PLEASE READ BEFORE OPERATING THE PT500

WARNING: To reduce the risk of burns, fire, electric shock or injury to persons: 

•   Do not put small body parts near the rollers

•  Do not use this product around any water or damp areas; also make sure your body is completely dry before sitting in the chair

•   If the power cord is damaged, do not use the chair. Make sure that the power cord is replaced by the manufacturer before you use the chair again

•  Periodically inspect the chair and power cord for signs of damage such as cracks or tears

•  Only one person can use this chair at a time, more than one person can cause damage or result in injury

•  Do not pull on the power cord or push the back rest to move the chair. Follow the directions on how to move the chair as described in the manual 

•   This device is for indoor use only, do not use it outdoors

•  Make sure the chair is turned off and unplugged when not in use

•  Do not massage any swollen, injured or inflamed body parts

•   Do not stand on the chair, only sit in it

•   Do not use the chair with a blanket or cushion over top of yourself or the chair. This can cause a heating problem and result in a fire or electric shock

•   Use this product only for its intended uses that are described in the manual

•  Only use attachments that are recommended by the manufacturer

•  Avoid eating or drinking while seated in the chair as crumbs and spilling may cause damage to the fabric and mechanisms within the chair 

•  Make sure all controls are turned OFF before disconnecting the chair from a power supply

•   Do not put the power cord near hot surfaces as this can damage the power cord and result in fire or electric shock

•  Do not use this product if there is unfamiliar noise or noise above the normal operation 

•   Connect this appliance to a grounded outlet only

•   Do not insert objects into any openings

•  Do not operate where oxygen or aerosol products are used

•  Only an experienced technician should perform maintenance on the chair, do not try to do it yourself

•  The maximum weight is 265 lbs

Precautions 

•   Comfortable clothing is recommended when using this product, do not use on bare skin

•  Do not force any body parts into the back rest while the rollers are moving, this can cause injury and/or damage to the chair

•   If you feel any abnormal discomfort while the chair is operating, turn off the power supply immediately and only use the product once you have consulted your physician

•  Do not sit on or put pressure on the remote control

•  Do not pull on the power cord

•  When using this product after it has been in storage, check to see that the product is operating properly prior to use

Care and Maintenance 

Main Body of Chair 

•  To remove dirt from plastic parts and armrests, wipe area with a damp cloth using a mild cleaning agent, wipe fabric exterior with damp cloth

•  Do not use alcohol, caustic agents or detergents to avoid damage, discoloring or splitting of the fabric

•  Clean with a soft damp cloth; do not clean with any coarse materials or strong chemicals as this can damage the fabric of the chair

Remote Control

•  Wipe remote control with only a dry cloth

•  Never use damp materials to clean remote.

Back rest Cushion and Head rest Cushion 

•  If the back rest cushion and/or head rest cushion are dirty, clean with a damp cloth or mild cleaning agent and leave out of chair until dry

Storing Method 

•  After cleaning chair, keep in a dry place, avoid excessive heat or cold. If you are storing the chair for a long time, cover with sheet or plastic to avoid it getting dusty or dirty

!

WARNING:   Make sure that the outlet which the power cord is plugged into is grounded; improper grounding can result in injury or 

a product malfunction. 

!

SAFETY INSTRUCTIONS

PT300Manual 8x10.indd   2

12/12/2009   4:10:38 PM

Summary of Contents for PT500





















Reviews: