Pure-therapy PT500, Instruction Manual

Page: 6 / 20

6
Model #: PT500
POWERING ON
HEAD REST CUSHION ADJUSTMENT
The head rest pillow and back rest pillow can be removed from the back of the chair. Removing them will increase the intensity of the massage.
To Remove/Add the Cushion:
1. Flip back the head rest pillow for temporary removal or peel it
away from the Velcro to completely remove it from the chair.
2. For a more intense massage on entire back area, unzip the
cushion compartment which is located in the back rest.
4. Reinsert the back rest and/or head rest cushion if you would
like to decrease the intensity of your massage.
To Power On:
1. Make sure that the chair is plugged into a grounded power source. We recommend
using a surge protected power source.
2. Flip the switch located on the back of the chair to the ON position.
3. With the remote control press the power button. The chair will turn on and begin a
combination massage on your upper body.
4. The leg rest massager functions are separate from the back massager functions. To
turn the leg rest massage on; press the start button located on the lower body sec-
tion of the remote.
Note: Each time the chair is powered off the default settings are restored which will allow for automatic mode to start up when the
chair is powered on the next time. It is normal to hear multiple beeps while the chair is powering on
Behind cushion,
unzip back rest
pillow for removal
3. Remove the cushion.
PT300Manual 8x10.indd 6 12/12/2009 4:10:54 PM