19
Model #: PT500
I am hearing strange noises coming from the
motors chair and/or the leg stretch.
• The motors within the chair make regular operation noises; therefore most noises
are completely normal. If the noise becomes very loud or straining, contact Pure
Therapy.
The massage rollers stopped moving during
operation
• If you apply too much pressure on the rollers they may stop moving for safety
purposes. Try to ease up on the rollers and they should start working again.
I am unable to recline the leg rest and/or back
rest
• Make sure there are no obstacles around the chair that can be stopping it from
reclining.
The leg rest is not turning on with the rest of the
chair
• The leg rest functions separately from the chair. You must turn it on separately using
the leg rest functions on the remote.
The chair is not working at all
• Make sure it is plugged into a power source.
• Make sure the switch located at the back of the chair is set to the on position.
• The time may have come up, try turning the chair on with the remote again.
There is damage to the cord and/or unit
• Stop using the chair immediately and do not use until repaired and inspected by a
professional.
I feel a strange pain or discomfort to my body
• Stop using the chair immediately and consult your doctor or physician
TROUBLESHOOTING
SPECIFICATIONS
Power .........................................................AC110-120V-60HZ
AC220-240V-50HZ
Measurements ...........................................44
"
x26
"
x30
"
N.W ............................................................172 lbs
Specification Of Motor
Name .........................................................VOLTAGE
Flap Motor..................................................DC110V
Knead Motor ..............................................DC110V
Move Motor................................................AC110V
Cylinder ......................................................DC110V
Pump .........................................................AC110V
Function
Back ...........................................................Knead,flap,knock,flap and knead together,
auto movement of mechnical hand, Back
cylinder
Bottom .......................................................Airpressure massage function
Calf .............................................................Airpressure massage function, calf cylinder
PT300Manual 8x10.indd 19
12/12/2009 4:11:41 PM
Summary of Contents for PT500
Page 1: ...1 Model PT500 Model PT500 ...
Page 20: ...20 Model PT500 ...
