Pure-therapy PT200, Instruction Manual

Page: 8 / 13

8
Model #: PT200
MUSIC FUNCTION
There are four vibration massage modes that massage the back of your neck, helping you to eliminate neck pain caused by stiffness and headaches.
Vibration massage provides relief to muscle strain by enhancing the flexibility of your muscles—leaving you relaxed. The vibration massage mode is
adjustable once you leave the Automatic massage mode.
To Adjust the Vibration Massage:
1. Turn the PT200 ON by pressing and holding the On/Off button (figure 1) for 2 seconds.
2. The massager will enter auto mode with a 15 minute timer, by default.
3. Press the
Mode/ON/OFF button (figure 1) once to turn off the vibration massage entirely. You can
now turn back on, and adjust the vibration massage.
4. Press the
Vibration Massage
button (figure 2) to set the intensity of the vibration massage, one bar
being lowest intensity and four bars being the highest intensity.
5. To completely stop the massage press and hold the Mode/ON/OFF button (figure 1) for 2 seconds.
Figure 1 Figure 2
Use the included ear phones and let the gentle nature sounds and music help you to relax, reduce stress, sleep better and uplift your mood. Sound
selections include; Flowing Waters, Beach Waves, An Evening with Crickets, Drops of Water, Piano Melody, Relaxing Xylophone, Tranquil Gardens and
Morning Birds.
To Turn on the Music Function:
1. Turn the PT200 ON by pressing and holding the
On/
Off
button (figure 1) for 2 seconds.
2. Plug the included earphones into the earphone jack
on the top of the massager remote. (figure 2)
3. Press the Music button (figure 3) to turn on the
music function, press repeatedly to change the
music type, or stop the music.
Figure 1
Figure 3
Figure 2
VIBRATION MASSAGE
Add heat to your massage session and further immerse yourself in the ultimate massage experience. The infrared heat compression technology
stimulates blood flow and soothes neck stiffness and tension. The heat function is adjustable once you leave the automatic massage mode.
To Adjust the Heat Function:
1. Turn the PT200 ON by pressing and holding the On/Off button (figure 1) for 2 seconds.
2. The massager will enter auto mode with a 15 minute timer, by default.
3. Press the
Mode/ON/OFF
button (figure 1) twice to turn off the heat function entirely. You
can now turn back on, and adjust the heat level.
4. Press the Heat button (figure 2) to turn on and set the intensity of heat, one bar being low
heat, and two bars being the high heat.
5. To completely stop the heat and massage press and hold the Mode/ON/OFF button
(figure 1) for 2 seconds.
Figure 1 Figure 2
HEAT FUNCTION