7
Model #: PT200
MASSAGE CONTROLS
The control panel consists of six buttons; Mode/ON/OFF, Timer, Music, Vibration, Temperature,
and Air Pressure. The PT200 lets you adjust the massage for your specific needs and allows you to
get the most out of your massager. You may use one or more of the massage functions at a time
for the most complete personalized massage experience.
Note: All massage functions will automatically stop after 15 minutes maximum;
the recommended time duration of massage from this product. If you would
like a longer massage, re-select the massage you would like and the massage
will begin again for 15 more minutes.
Note: If you experience any pain, or require the massager to stop applying pressure, you can
press the air pressure release button
. If you have experienced any pain while
using the PT200, discontinue use until you have spoken with your family physician.
AUTOMATIC MODE
There is a timer function on the massager that allows you to choose the length of your massage, 5, 10 or 15 minutes. 15 minutes is the recommended
massage time length. If you wish for a longer massage once the massage timer runs out, just turn on the unit again and the timer will restart.
To Turn on the Massage Timer:
1. Turn the PT200 ON by pressing and holding the
On/Off
button (figure 1) for 2 seconds.
2. The massager will enter auto mode with a 15 minute timer, by default.
3. Press the
Timer
button (figure 2) to change the massage time length, the timer will cycle
from 5 to 10 to 15 minutes.
Figure 1
Figure 2
MASSAGE TIMER
Upon startup of the head and eye massager the unit will enter automatic mode, this mode gives you a demonstration of the features and functions of
the massager. Automatic mode performs the massage on it’s most intense settings for vibration, heat and airbag massage. If you find that the automatic
massage is too intense for your own health care needs, you can adjust the mode. (Please see Page 7 and 8 for more information)
About Automatic Mode:
1. Turn the PT200 ON by pressing and holding the On/Off button (figure 1) for
2 seconds.
2. The massager will enter auto mode with a 15 minute timer, by default.
3. While in auto mode you have the option to adjust the massage time length,
and the type of music being played.
4. Press the
Timer
Button (figure 2) to adjust the massage time length (see
Massage Timer on page 7). Or press the
Music
button (figure 3) to adjust
the music being played. (see Music Function on page 8)
Figure 1
Figure 2
Figure 3
Note: Once you have pressed the Mode/On/Off button to leave automatic massage mode, you will be able to adjust the vibration
massage, air pressure massage or heat function at any time.
Summary of Contents for PT200
Page 13: ...www pure therapy com ...
