6
Model #: PT200
Battery Power:
You may also use 4 AA batteries to power the
massage unit, which will give you approximately
3 hours of continuous massage time.
1. Remove the battery compartment cover on
the back of the remote
2. Place 4 AA batteries in the remote.
3. Press and hold the
ON/OFF
button on
the front of the remote for 2 seconds.
4. Ensure that you do not have both sources of
power connected at one time.
GETTING STARTED
To Get Started:
1. Carefully open the top of the giftbox.
2. Remove the PT200 massage unit from the box.
3. Remove any protective foam or plastic from the device.
4. Plug the power cord into a wall outlet. We suggest using a surge protected power
bar, and plug the other end into the DC jack on the top of the remote.
5. We recommend sitting while using the massager, please follow the fitting
instructions before beginnng your first massage.
FITTING THE MASSAGER
To Fit the Massager to your Head:
1. Place the massager on your head with the eyeholes in front of your eyes.
2. Turn the fitting knobs on each side of the massager clockwise to tighten, or
counterclockwise to loosen. The massager should fit snugly around your head.
3. Turn the tightening knob on the top of the massager clockwise to shorten or
counterclockwise to lengthen the rise of the massager. You will know you have the
correct fit when the massager does not fall off when you move slightly, and you can
see out of the eyesight holes.
Note: Each time the massager is powered off, the default settings are restored when the massager is powered on the next time. It is
normal for the massager to move for a cycle, about 2 seconds, upon every shutdown or startup.
DC Input
POWERING ON
To Power On:
1. Ensure you have plugged the power adapter into an
appropriate wall outlet, and into the DC jack on the remote.
2. Place the massager on your head.
3. Ensure proper fit.
4. Press and hold the
ON/OFF
button on the front of the
remote for 2 seconds.
5. The LED screen on the remote will light up and the AUTO
massage mode will begin.
6. You will now have the option to choose massage functions or
intensity settings. (See MASSAGE CONTROLS on Pg. 7)
7. To Turn off the massager at any time, press and hold the
ON/
OFF
button for 2 seconds again.
Summary of Contents for PT200
Page 13: ...www pure therapy com ...