11
4. HOW TO FILL WITH WATER
Ÿ
Make sure the iron is turned off and the AC Power Cord is unplugged from the
electrical outlet.
Ÿ
Pour out the remaining water after use.
Ÿ
If the water is very hard, it is advised to use distilled water or demineralised
water only. Do not use scented water, vinegar or ironing aids in the water tank,
this may cause brown spitting and staining.
Ÿ
Turn the steam control to OFF position and temperature Control Dial to the
MIN position. Let the iron rest on the heel.
NOTE:
Ÿ
The water level can be observed through the transparent part of the tank, when
iron placed vertically. When the water level becomes low, refill the tank,
following the procedure described in steps 1 to 3 above.
Ÿ
Fill the water through the filling opening into the water tank
，
Using beaker
provided, Pour water up to the "MAX" Line on the tank.
Most tap water can be used in this iron. Do not use water additives or substitute
water such as linen or scented water in the steam iron, they can stain fabrics or
damage the iron. Do not fill the water more than the "MAX" position.
5. FUNCTIONS DESCRIPTION
Dry ironing:
Ÿ
Position the iron vertically. Turn the steam control to OFF position, set the
temperature control to the suitable position, plug in the iron, Preheat the iron
until the indicator light goes out, you can start dry ironing.
Spraying:
Ÿ
The spray may be used with steam or dry ironing.
Ÿ
The spray feature is particularly helpful for removing stubborn wrinkles and
where extra dampening is needed.
Ÿ
Ensure that water tank is at least 1/4 full. Simply pump the spray button, Mist will
be sprayed out from the spraying nozzle.
Ÿ
Before using the spray feature, check the fabric label for ironing instructions
because some fabrics may be spotted or stained with moisture.
