ARC160MAX、ARC200MAX、ARC250DMAX、ARC250MAX、ARC315MAX
INVERTER MMA/ARC SMART WELDER MAX SERIES
·
user’s manual
·
HW-YF-240D-A1
7
Picture5-1 Installation of ARC 200 MAX
6. OPERATION INSTRUCTION
1) Turn the power switch to “ON”,the power indicator lit up,cooling fan within the machine start to
work immediately
2) Please ensure the suitable welding current and arc force current according to the thickness of
the workpiece ,the diameter of the electrode, station and technology needs
3) Clip electrode to the electrode holder,the machine is in the manual welding mode and standby
state.
Flat welding current and electrode specification list:
Specification
φ2.5
φ3.2
φ4.0
φ5.0
Current
70-100A
110-140A
170-220A
230-280A
4) Arc force adjusting function is used to adjust the welding performance, specially in vertical and
overhead welding.With the use of welding current adjusting knob,it can achieve the ideal effect of
welding.
5) When welding in wet, high altitude, narrow, metal containers and other places, it is
recommended to use the VRD function which can ensure the no-load output voltage is about 14v-24v .
(VRD indicator is on, VRD function is on)
WARNING!
Before connecting operation,please make sure all the power is turned off. The right
order is to connect the electrode cable and earth clamp cable to the machine first, and make sure
they are firmly connected and then put the power plug to the power source.
