ARC160MAX、ARC200MAX、ARC250DMAX、ARC250MAX、ARC315MAX
INVERTER MMA/ARC SMART WELDER MAX SERIES
CAUTION
Please make the generator’s power at least 2 times than the welder’s rated power when
using generators as power supply
When the DC inverter welder works with AC welder, please don’t let the output cable of two
different machine connected together in case of welder damage
Once you touch the electric parts will result in electric shock
● Don’t touch the electric parts.
● Make sure the welder connect to earth before using.
● Off power supply while assembly and maintenance.
● Don’t use the welder while opening the case.
● Please use the good insulating gloves.
ARC
、
Spatter and slag may burn eyes and skin, abnormal noise may hurt hearing
● Please use the welding mask to protect your face and eye
● Please use the welding clothes to protect your body
● Please use hearing protecting tool when it is noising
Using welder in a narrow place or higher have the potential to cause electric shocks, stinging
lead to falls and other accidents.
● Please use the VRD device or build-in VRD welder in the following location
●2m or higher location with risk of falling, workers who may be exposed to bars and other
places of grounding electrical conductivity.
● Please check the VRD device per the safety rule while operating
The dust, smoke or gas caused by welding are bad for health
● Please use local exhaust ventilation equipment and respiratory protective equipment.
● When operating in narrow places, please check and accept monitoring of adequate
ventilation, wearing of respiratory protective equipment
● Please don’t use the welder in the degreasing, cleaning and spraying area
It may result in fire, blasting or other accident during welding
● Please don’t place any Combustible and flammable gases in the welding location.
● Please don’t weld any airtight container, like oil tank or tube or others
● Please equip with fire apparatus in welding location.
Lifting Device:
The standard package for this welder is carton or wooden box without any connector for
lifting device, so when the welder arrive, please use the fork lift truck to move the machine
and then open it.
●When the welder equipped with rings for lifting, you can use the ring to transport the
machine, but please notice that don’t use roller to move the welder since it may damage the
welder
● Please make sure all accessories have been removed when lifting
● When the welder is being lifted, please make sure there is nobody below the welder and
there is someone to mention the passengers.
● Please don’t use the crane to move the welder quickly.
● Please install the welder in accordance with the assembly direction.
DANGER
CAUTION
DANGER
CAUTION
CAUTION
