Re
vi
si
o
n 1
.0
Product Manual
ITSCAM FF 600
31
www.pumatronix.com
9)
Create the redirect ports as described:
a.
-
80 (private) → 9080 (public)
b.
-
2000 → 2000
c.
-
2005 → 2005
d.
-
10000 → 10000
10)
Click on
Install;
11)
Please wait while the entire shipping and installation process is completed. Depending on the
network situation, it may take up to 15 minutes for the entire process to be completed;
12)
Force the initialization of the plugin by clicking on the
Start
button;
13)
Check after this first startup that the plugin is automatically booted when accessing the ITSCAM
600 device system.
Preventative Maintenance
The ITSCAM FF 600 image capture and processing device shall provide images without artifacts. However,
if the lenses or the protective box outer surface has any dirt, it must be cleaned;
14)
Spray liquid for cleaning lenses on the surface of the lenses or water on the glass of the
protective box, so that it is possible to remove excess dirt adhered to the surface:
15)
Use a soft cloth that does not loosen fibers to remove dirt, moving the cloth in only one
direction;
16)
Wipe a dry cloth afterwards to finish cleaning and do not use force, as it is possible to damage
the surface.
Figure 15 - ITSCAM FF 600 protection glass
Warranty General Conditions
Pumatronix guarantees the product against any defect in material or manufacturing process for a period of
1 year from the invoice issuance date, provided that, at the discretion of its authorized technicians, a defect
is found under normal conditions of use.
The replacement of defective parts and execution of services resulting from this Warranty will only be
provided in Pumatronix's Authorized Technical Assistance or a third party expressly indicated by it, where
the product must be delivered for repair.
This Warranty will only be valid if the product is accompanied by a
Maintenance Form
, duly completed and
without erasures, and an Invoice.
