15
Max Power Set
300W
Max Power Set
100W
Here is the detailed procedure to make the charger work. All the screens and operations
will take Li-Po BALANCE CHARGE program for example.
Note: We will explain one channel as the operating procedure of Channel 1 and
Channel 2 is identical.
1- Operating in AC Mode
ULTIMA 400 DUO comes with a built-in switching power supply. You can connect the AC
power cord directly to the AC mains socket. (100-240V AC).
Note: The charging power in AC mode is 400W totally for Channel 1, Channel 2
In AC mode, it supports Power Distribution. The total power for Channel 1, Channel 2 is
400W. You could set the Max Power for one channel (Take Channel 1 for example) as
following :
And the other channel (Channel 2) will take the rest power automatically (For example, if
you set channel 1 as 300W, the channel 2 will be 100W).
NOTE 1 : If Channel 1 and Channel 2 are both charging, you can’t change the power distri-
bution.
NOTE 1 : If Channel 1 is charging, you can change power of Channel 2 and Channel 1, the
power supply will take the rest power automatically.
2- Operating in DC Mode
Please connect the ULTIMA 400 DUO with AC/DC power supply by supplied DC input
cable. Also you could use terminal clips with DC connectors, for attaching directly to 12V
car batteries. It is critically important that you use either a fully charged 13.8V car battery
or a high quality AC/DC power supply in the range of 11-18V DC output with minimum
power 500W or higher to insure reliable performance.
Power Distribution
