12
BATT/PROG
STOP
- DEC
INC +
ENTER
START
BATT/PROG
STOP
- DEC
INC +
ENTER
START
BATT/PROG
STOP
- DEC
INC +
ENTER
START
BATT/PROG
STOP
- DEC
INC +
ENTER
START
BATT/PROG
STOP
- DEC
INC +
ENTER
START
BATT PROG / STOP
It is used to STOP the progress or GO Back to previous Step/Screen
DEC Button
It is used to go through the menus and DECREASE the parameter value
INC Button
It is used to go through the menus and INCREASE the parameter value
ENTER/START Button
It is used to ENTER parameter on screen and START the program
When you are willing to alter the parameter value in the program, press the START/ENTER
button to make it blink then change the value by pressing DEC and INC button. The value
will be stored by re-pressing the START/ENTER button. If there is another parameter can
be altered in the same screen, when you confirm the first parameter value, the next param-
eter value will start to blink which means it is ready to alert.
When you are willing to start the process, press and hold the START/ENTER button for
3 seconds. When you are willing to stop the progress or go back to previous step/screen,
press the BATT PROG/STOP button once.
When you power on the charger, it will enter LiPo Battery balance program directly. You
could change the mode (balance mode, normal charge mode, fast charge mode, store
mode or discharge mode), enter the desired charging/discharging mode, set the referred
parameter and start the progress.
If you have no request for LiPo Battery program, please press the BATT PROG/STOP
button to enter BATT PROGRAM screen.
Buttons Explanation
