Pulsar Trionyx T3, Manual

Page: 34 / 112

6. For Thermal Imaging mode:
Select the operation mode (Forest/Rocks/Identification/User) with a
long press of the MODE (2) button. User mode allows you to setup and
save custom brightness and contrast settings, as well as select one of
the three modes as the base.
Select the appropriate color palette with a long press of the DOWN (5)
button or in the main menu (see the
Color Modes section for details).
7. For Thermal Imaging and Fusion mode:
Enter the main menu with a long press of the MENU (3) button and
select the calibration mode: manual (M), semi-automatic (SA) or
automatic (A)(see the
Calibration Mode section for details).
Calibrate the image by briefly pressing the ON/OFF (1) button (if the SA
or M calibration mode has been selected). Close the lens cover when
calibrating manually.
8. For Digital and Fusion mode:
Rotate the lens focus knob of the digital channel(8) to focus on the
visual target.
To increase the quality of observation in low light conditions at night,
turn on the built-in IR illuminator by briefly pressing the UP (2) button.
Toggle between the IR illuminator power levels with long presses of the
UP (2) button (see the
IR Illuminator section for details).
9. Activate the quick menu by briefly pressing the MENU (3) button to
adjust the brightness and contrast of the displays and smooth digital zoom
(see the
Quick Menu Functions section for details).
10. When finished turn the device off with a long press of the ON/OFF (1)
button.
Warning!Do not point the device's lenses at intense energy sources such
as laser emitting devices or the sun. It can damage electronic components
in the device. The warranty does not cover damage arising from failure to
comply with the operating rules.
Warning!The radiator cooling system (12) becomes warm during