manualshive.com logo in svg

Pulsar Trionyx T3, Manual, Page: 103 / 112

Share
Download
Pulsar Trionyx T3 Manual Download Page 103

 

1. Connect one end of the USB Type-C (18) to the USB Type-C (17) port 

of your device and the other end to the USB port of your PC / laptop.

2. Turn the device on with a short press of the ON/OFF(1) button (a 

device that has been turned off cannot be detected by your computer).

3. Your device will be detected by the computer automatically; no drivers 

need to be installed.

4. Two connection modes will appear on the display: Power and Memory 

Card(external storage device).

5. Select the connection mode with the UP (2)/DOWN (5) buttons.
6. Confirm the selection with a short press of the MENU (3) button.

Connection modes:

Power

In this mode, a PC/laptop is used as an external power supply. The 
status bar shows the icon 

. The device continues operating and all 

functions are available.
The Battery Pack installed in the device is not being charged.
When the USB is disconnected from the device when in the Power
mode, the device keeps operating with the Battery Pack if it is available 
and sufficiently charged.

Summary of Contents for Trionyx T3

















































































































Reviews:

No comments