PSBSEP04124
www.pulsar.pl
6
1.4 Technical parameters.
- electrical parameters (Table 3)
- mechanical parameters (Table 4)
- safety of use (Table 5)
- operation parameters (Table 6)
Electrical parameters (Table 3).
Mains supply
230 VAC (-15%/+10%)
Current consumption
0,5A@230V AC max.
Power supply frequency
50Hz
PSU’s power
60W max.
Efficiency
70%
Output voltage
4 x 12V
The adjustment range of the output
voltage
12÷18V DC
all outputs independently adjustable
Output current
4 x 1A + 0,2A battery charging or
4 x 1A + 0,5A battery charging
Rise time, fall time and maintenance time
of output voltage
2ms / 20ms / 60ms
Ripple voltage
50 mV p-p max.
Current consumption by the PSU
85 mA – battery operation
Battery charging current
0,2A/0,5A jumper selectable I
BAT
Short-circuit protection SCP
200% ÷ 250% of the PSU power - fuse current limitation (fuse
replacement required)
Overload protection OLP
110% ÷ 150% (@25ºC) of the PSU power – PTC/melting fuse
current limitation, manual restart (disconnection of the DC output
circuit required),
Overvoltage protection OVP
15V/18V/21V – independently selectable with the "OVP" jumper
for each channel
Battery circuit protection SCP and
reverse polarity connection
4A - current limitation, F
BAT
fuse (failure requires fuse
replacement)
Deep discharge battery protection UVP
<20,0 V (± 5%) – disconnecting the battery terminal
Surge protection
4 x varistor
Antisabotage protection:
- TAMPER output indicating enclosure
opening
- microswitch, NC contacts (enclosure closed),
0,5A@50V DC (max.)
Optical indication of operation:
YES – LEDs
Technical outputs:
- FAC; output indicating AC power failure
- FLB; output indicating low battery
voltage
- FPS; technical output of the PSU
operation status
- OC type, 50mA max. normal operation: L (0V), failure: hi-Z
(automatic return once the normal operation is restored)
- R type – relay type, 1A@ 30Vdc/50Vac max.
Delay time: app. 5s/140s/17min/2h20m (+/-5%)
- OC type, 50mA max. normal operation: L (0V), failure: hi-Z
state V
BAT
< 23V
- OC type, 50mA max. normal operation: L (0V), failure: hi-Z
state (automatic return once the normal operation is restored)
F1 ÷ F4 fuses
F
BAT
fuse
F
MAIN
fuse
F 1A /250V or PTC 1,1A
F 4A / 250V
T 1A / 250V
Mechanical parameters (Table 4).
Enclosure dimensions
345 x 322 x116 (WxHxD)
Mounting
See Fig. 3
Battery housing:
2 x 7Ah/12V (SLA) max.
Net weight
5,12/5,36kg
Enclosure
DC01 1mm steel plate, RAL 9003
Closing
Cylindrical screw x 2 (at the front)
Terminals
Outputs :
Ф
0,41÷1,63 (AWG 26-14)
Notes
The enclosure has a 15mm distance from the mounting surface so the cables
can be led.
