8
4.2 Battery assisted operation.
In the case of power failure, in the unit will instantly switch to the battery assisted operation.
In order to activate the operation of the PSU from the battery itself, connect the BAT connectors in accordance
with the indications: +BAT red to ‘plus’ and, -BAT black to 'minus’ of the battery and press and keep depressed for
five seconds the START pushbutton on the equipment board.
The PSU is equipped with the discharged battery disconnection system; the configuration of
functions through the jumper ‘A’. The battery protection is on if the jumper ‘A’ is removed.
4.3 Maintenance.
Any and all maintenance operations may be performed following the disconnection of the PSU from the
power supply network. The PSU does not require performing any specific maintenance measures, however, in the
case of significant dust rate, its interior is recommended to be cleaned with compressed air. In the case of fuse
replacement, only the substitutes in conformity to the original ones are allowed.
WEEE MARK
The used electric and electronic products, do not mix with general household
waste. There are separate collection system for used electric and electronic
products in accordance with legislation under the WEEE Directive and is effective
only with EU.
WARRANTY
24 months since the sale date, 36 months since the production date.
THE WARRANTY IS VALID ONLY after presenting the invoice of the sale to which the claim refers.
Pulsar K.Bogusz Sp.j.
Siedlec 150,
32-744 Łapczyca, Polska
Tel. (+48) 14-610-19-40, Fax. (+48) 14-610-19-50
e-mail:
,
http://
www.pulsar.pl
