www.pulsar.pl
INTW
7
Fig. 5. The window of network settings.
In the settings window, select the „Manually configure network settings” option and change the IP address
of the interface in the unblocked area to 192.168.1.101. The subnet mask and the default gateway IP address
should be left unchanged.
Before setting the network address, make sure it is not used by any device on the network.
Confirm the changes by pressing the „Save” button. The ” Digi Device Discovery” application
will display the message about the need to restart the interface, which should be confirmed by pressing "OK”. A
reset progress window will be displayed.
From now on, the router will "see" our interface at the new address.
