www.pulsar.pl
INTW
6
4.4 STEP 2 – The IP address configuration.
For proper IP address change, it is recommended to turn off the firewall of the antivirus
program for the time of configuration process.
If the yellow LED [8 - fig.1] is permanently illuminated, make sure whether the interface has logged to the
proper router. To do that, run the „Digi Device Discovery” program with the
icon. After launching, the
program will display the logged-in Wi-Fi interface. Identification of our module can be done by comparing the MAC
addresses
Fig. 3. Window of the ‘Digi Device Discovery’ program
showing a logged-in Wi-Fi interface.
The MAC address of the interface is located under the barcode of the DIGI module.
Fig. 4. The MAC address located on the DIGI module.
In order to facilitate the further use of the devices in the network, change the IP address assignment
from automatic to manual. To do that, press the right mouse button on the line with the selected interface and
choose „Configure network settings” option.
