www.pulsar.pl
INTW
20
6. Configuring the connection in the PowerSecurity program.
For further configuration, the PowerSecurity program is required. The program can be downloaded at:
http://www.pulsar.pl/pliki/PowerSecurity.exe
The program is saved as an executable file and does not require installation.
1) Run the PowerSecurity.exe program.
2) Choose the Power Supplies > New Power Supply option from the menu bar. The “Configuration of
connection” window, that allows configuring the settings, will be displayed.
Fig. 17. The connection configuration window.
PSU
Description
Name
PSU’s name
The name that should be assigned individually to each PSU.
Address
1;
Fixed address.
Refresh period of
the preview [ms]
100 ÷ 60 000ms;
Refresh period of the parameters in the preview window.
CONNECTION
Type
Modbus RTU – TCP/IP
TCP address
192.168.1.101
PSU network address.
Each Ethernet interface in the network has a unique address.
TCP port
2101
Response time [ms]
100 ÷ 60 000ms;
The response time from the power supply interface.
The interval
between the
transmissions [ms]
The minimal interval between transmissions.
The number of
retransmissions
The number of retransmissions after which the program reports a connection error.
3)
Once the connection configuration is loaded, the window with a „preview” tab is displayed. Press the
icon in the in the upper left corner to connect with the PSU. As a result, the window will display current
parameters of the PSU, automatically updated on the basis of a preset refresh cycle.
