www.pulsar.pl
INTRW
15
TCP Sockets profile settings.
After logging in the interface configuration page, select the ‘Serial Ports’ option from the ‘Configuration’
group. Then, select ‘TCP Sockets’ from the ‘Select Port Profile’ window and approve your choice by clicking
‘Apply’.
Caution! If the interface was configured before, the ‘Serial Port Configuration’ window with current profile will
appear instead of ‘Select Port Profile…’. In such case, click ‘
Port 1
’ and then ‘
Change profile…
’ at the top of the
next window. Only now, will the ‘Select Port Profile…’ window appear and the ‘TCP Sockets’ profile can be chosen.
Make setting adjustments in the ‘TCP Server Settings’ subsection as shown below:
Fig. 16. Settings of the ‘TCP Sockets’ profile.
Approve the settings by clicking “Apply’.
If the port 2101 is already taken, choose another one, e.g. 2102. The selected port number is to be used
consistently from now on.
