www.pulsar.pl AWZ222
GREY POWER plus
6
W
H
D
Output current
- for grades 1, 2:
Io = 1,1A + 0,9A battery charging current
- for general use:
Io = 2A (without a battery)
Io = 1,6A + 0,4A battery charging current
Io = 1,1A + 0,9A battery charging current
Output voltage adjustment range
11÷14,5V DC
Ripple voltage
20mV p-p
Current consumption by PSU systems
15 mA max.
Battery charging current
0,4A/0,9A jumper selectable
Short-circuit protection SCP
200% ÷ 250% of PSU power - current limitation and/or fuse F
BAT
damage in the battery circuit (fuse-element replacement
required)
Automatic return
Overload protection OLP
110% ÷ 150% (@25ºC÷65ºC) of PSU power - limitation by the
PTC resettable fuse, manual restart (disconnection of the DC
output circuit)
Battery circuit protection SCP and reverse
polarity connection
F3,15A- current limitation, F
BAT
fuse (in case of a failure, fuse-
element replacement required)
Surge protection
varistors
Overvoltage protection OVP
U>16,5V
disconnection
of
the
output
voltage
(AUX+
disconnection), automatic return
U> 14,5V fault indication
Deep discharge battery protection UVP
U<10V (± 0,5V) – disconnection of battery terminal
Tamper protection:
- TAMPER - indicates unwanted opening of the
enclosure
- microswitch, NC contacts (enclosure closed), 0,5A@50V DC
(max.)
Technical outputs:
- EPS; output indicating AC power failure
- PSU; output indicating no DC power/PSU failure
- APS; output indicating battery failure
- OC type: 50mA max.
Normal operation: L state (0V),
failure: hi-Z state,
- delay time 0s
÷1h (+/-20%) – jumper selectable
T
AC
- OC type: 50mA max.
Normal operation: L state (0V),
failure: hi-Z state,
- OC type, 50mA max.
Normal operation: L state (0V),
failure: hi-Z state
LED indication
LEDs: AC/DC power status, failure
Acoustic indication
piezoelectric indicator 75dB/0,3m, switchable via jumper
Fuses:
- F
MAINS
- F
BAT
T 500mA / 250V
F 3,15A / 250V
Table 4. Mechanical specifications.
Dimensions
W=230 H=300 D+D
1
=92+8 mm [+/- 2 mm]
W
1
=235, H
1
=305 [+/- 2 mm]
Fixing
See Fig., 3
Fitting battery
17Ah/12V (SLA) max.
180x165x85mm (WxHxD) max
Net/gross weight
3 / 3,2 kg
Enclosure
Steel plate DC01, thickness: 0,7mm, colour: RAL 9003
Closing
Cheese head screw (at the front)
Terminals
Mains supply 230V AC:
Ф0,51÷2,05 (AWG 24-12), 0,5÷1,5mm
2
Outputs: Ф0,51÷2,05 (AWG 24-12), 0,5÷1,5mm
2
BAT battery outputs: 6,3F-0,5, 30cm
Notes
The enclosure does not adjoin the assembly surface so that cables can be led.
