Pulsar Forward FN135, Instruction Manual

Page: 9 / 84

12 11
Enter a submenu of the main menu with a short press of the М button.
Exit the submenu with a long press of the М button.
Automatic exit takes place in 10 sec of inactivity.
Upon exit from the menu the cursor location
is memorized only
for the duration of the working session (i.e. until the unit is turned off).
Upon restarting the unit and entering the menu the cursor will be
located on the first menu option.
Microphone
Wi-Fi settings
General settings
–
Language
–
Date
–
Time
–
Photo resolution
–
Factory reset
–
Formatting
Remote control activation
Device information
Automatic shutoff
Wi-Fi Settings
Password setup
This submenu allows you to set a password to
access your unit from an external device. The
password is used to connect an external device
(i.e. smartphone) to your Forward FN.
Enter the menu with a long press of the М (7)
button.
Press the RIGHT (6) and LEFT (8) buttons to
select submenu “Wi-Fi Settings”.
–
Enter the submenu with a short press of the М
button.
–
Press RIGHT or LEFT to select item “PAS” .
–
Enter the item with a short press of the М button.
–
The default password “12345” appears on the
display.
–
Set the desired password with RIGHT or LEFT
(button RIGHT to increase value; button LEFT to
reduce). Switch between digits with a short press
of the M button.
–
Save the password and exit the submenu with a
long press of the M button.
Access level setup
This submenu allows you to set required access
level of the Stream Vision application to your unit.
–
Select item “Access level setup” in submenu
“Wi-Fi Settings” with the RIGHT (6) and LEFT
(8) buttons.
–
Enter the submenu with a short press of the М
button.
–
Select access level “Owner” or “Guest” with
the RIGHT (6) and LEFT (8) buttons.
- Access level Owner . The Stream Vision user has
the complete access to all functions of the unit.