Pulsar dBi 10, Instruction Manual, Page: 18 / 55

DBI (HART) INSTRUCTION MANUAL
18
Typical wiring for a Non-Hazardous location
The HART modem and PC or HART programmer are used to set up the
operation parameters for the dBi transducer. The output can either be as a
4-20mA current giving level or distance or as a digital signal via a HART
master.
The dBi transducers cable is a twisted pair with overall cable screen. The
twisted pair are red and black, connect the red to +ve and the black to
– ve.
The screen should go to signal ground.