DBI (HART) INSTRUCTION MANUAL
10
dBi15: <8
o
(all beam angles are inclusive
,
but give an
effective beam angle of <3
o
)
OUTPUTS
Digital Communications
FSK (Frequency Shift Keying) modulation of 1200-
2400Hz
Communication Protocol
HART 7, 4-20mA loop powered, output resolution 1µA
PROGRAMMING
PC programming (via HART
modem and 250 Ohm resistor)
HART PC Lite (setup only), Pulsar PC Suite-
and 250 Ohm resistor).
HART PC (setup, installation,
echo profiles, cloning and troubleshooting).
Program security
Via passcode
Programmed data integrity
Via non-volatile RAM
PC Setup and monitoring
Compatible with Win 7, Win 8 and Win 10
SUPPLY
Power supply
10 - 28V DC
Power Consumption
Current consumption at start-up = 12mA, unit
powered every 15 minutes for 4 seconds the average
current = 53µA
Pulsar Measurement operates a policy of constant development and
improvement and reserve the right to amend technical details, as necessary.
Summary of Contents for dBi 10
Page 2: ...2...
Page 11: ...PULSAR MEASUREMENT 11 EU Declaration of Conformity...
Page 23: ...PULSAR MEASUREMENT 23...
Page 24: ...DBI HART INSTRUCTION MANUAL 24...