AGENT-2 S41D Line - User Manual
AG2-S41D/MU-EE
Ed. Jun-2012 Proprietary information
73 of 89
1. Query-
interval: Click on the “query
-
interval” textbox and specify a new number
from 1 ~ 18000. The query-interval field is used to set the time (in seconds)
between transmitting IGMP queries. Entries between 1 and 18000 seconds are
allowed. Default = 125.
2. Max-response-
time: Click on the “max
-response-
time” textbox and specify a
new number from 1 ~ 124. This determines the maximum amount of time in
seconds allowed before sending an IGMP response report. The max-
response-time field allows an entry between 1 and 124 (seconds). Default =
10.
IGMP passive snooping:
1.
Report suppression: Click on the “report suppression” drop
-down menu from
the “report suppression” drop
-
down list in order to choose “Enable” or “Disable”
for the switch. Use this command to enable report suppression for IGMP
version 1 and version 2. Report suppression does not apply to IGMP version 3,
and it is turned off by default for IGMP version1 and IGMP version 2 reports.
The switch uses IGMP report suppression to forward only one IGMP report per
multicast router query to multicast devices. When IGMP router suppression is
enabled, the switch sends the first IGMP report from all hosts for a group to all
the multicast routers. The switch does not send the remaining IGMP reports for
the group to the multicast routers. This feature prevents duplicate reports from
being sent to the multicast devices.
2.
Update Setting: Click on the “Update Setting” button after finishing the IGMP
Snooping settings procedure.
