AGENT-2 S41D Line - User Manual
AG2-S41D/MU-EE
Ed. Jun-2012 Proprietary information
67 of 89
2.
Radius Server IP: Click on the “Radius Server IP” textbox and specif
y the IP
address of the remote radius server host.
3.
Radius Server Port: Click on the “Radius Server Port” textbox and specify the
UDP destination port for authentication requests. The host is not used for
authentication if set to 0.
4. Secret Key: Click on the
“Secret Key” textbox and specify the authentication
and encryption key for all radius communications between the Switch and the
radius server. This key must match the encryption used on the radius daemon.
All leading spaces are ignored, but spaces within and at the end of the key are
used. If spaces are used in the key, do not enclose the key in quotation marks
unless the quotation marks themselves are part of the key.
5. Timeout <1-
1000>: Click on the “Timeout” textbox and specify the time interval
(in seconds) that the Switch waits for the radius server to reply before
retransmitting. Enter a value in the range 1 to 1000.
6. Retransmit <1-
100>: Click on the “Retransmit” textbox and specify the number
of times a radius request is resent to a server if that server is not responding or
responding slowly. Enter a value in the range 1 to 100.
7.
Submit: Click on the “Submit” button after finishing the Radius Server Setting.
Delete Radius:
