Pullnet AGENT-2 S41D Line User Manual Download Page 29

Page: 29 / 89

AGENT-2 S41D Line - User Manual

AG2-S41D/MU-EE

Ed. Jun-2012 Proprietary information

27 of 89

Chapter 8 - Web-Based Browser Management

The AGENT-2 S41D provides a Web-Based browser interface for configuring and

managing the switch. This interface allows users to access the switch by using any

preferred Web Browser.

This chapter describes how to configure the AGENT-2 S41D advanced Ethernet

switch by using its Web-based Browser interface.

8.1 Logging-On to the Switch

SWITCH IP ADDRESS

In your web browser, specify the IP address of the AGENT-2 S41D switch. Default

IP address is 192.168.1.10.

Enter the factory default login ID: root.

PASSWORD

Enter the factory default password (no password).

Or enter a user-defined password if you followed the instructions previously and

changed the factory default password.

Then click on the “Login” button to log on to the

AGENT-2 S41D switch.

Summary of Contents for AGENT-2 S41D Line


























































































Search results

Summary of Contents for AGENT-2 S41D Line

Reviews:

Related manuals for AGENT-2 S41D Line

Brands by name

Popular brands

Pullnet AGENT-2 S41D Line, User Manual

Search results

Summary of Contents for AGENT-2 S41D Line

Reviews:

Related manuals for AGENT-2 S41D Line

Brands by name

Popular brands